E3Z Souare Photoelectric Switch Series

A photoelectric switch is a sensor device that uses optical principles for object detection, lt mainly perceives the position and presence of objects by emitting a beam of light and detecting the state of the received beam. Photoelectric switches typically consist of a light source, photoelectric sensors, and signal processing components.

FEATURES
SEND US YOUR MESSAGE
Video
Description

Throuht-beam type

Through-beam bype photoelectric switch is designed that via the light beam between opposite-mounted transmitter and receiver, the object passing through these two devices will interrupt the light beam and start the receiver. (Fig.R1)

 

Diffuse type

Diffuse reflection type photoelectric switch integrates the transmitter and the reciver. Light reflected by the photoelectric switch is reflected back to the receiver by the detected object. (Fig.R2)

 

Retroreflective type

Retroreflective type photoelectric switch also integrates the transmitter and the receiver, Its difference from other models is that reflecotr is used to relfect light to the photoelectric switch. Though the object between the photoelectric switch and reflector can reflect the light, it is much less efficient than the reflector so as to cut down reflected light. (Fig.R3)

 

Convergence reflection type (condensation type)

The working principle of convergence reflection type photoswitch is similar to that of direct reflection type one, while its projector and light receiver focus on boject distance, only when the object presents to the focus can the photoswitch actuate.(Fig.R4)

 

 

Outward appearance code

 

Model E3Z
Dimension
Sense distance 5~20CM
Diffuse type DC10~30VDC NPN NO  
NC  
NO+NC E3Z-D61
PNP NO  
NC  
NO+NC E3Z-D81
AC90~250VAC NO  
NC  
Relay  
Sense distance 2M
Reflection-type DC10~30VDC NPN NO  
NC  
NO+NC E3Z-R61
PNP NO  
NC  
NO+NC E3Z-R81
AC90~250VAC NO  
NC  
Relay  
Sense distance 10m
Through-beam type DC10~30VDC NPN NO  
NC  
NO+NC E3Z-T61
PNP NO  
NC  
NO+NC E3Z-T81
AC90~250VAC NO  
NC  
Relay  
Output voltage peak DC:200mA、AC:300mA
Consumption current DC<15mA、AC<10mA
Standard detected object DC<2ms、AC<20ms
Repeatability 2°~10°
Response frequency Transparent oropaque body
Ambient temperature -25℃ - +55℃
Ambient brightness Sunlight below 10000LX, incandescent lamp below 30000LX
Shell material ABS plastic
Protection grade IP54

 

 

Application illustration or photoelectric switch

 

 

Hot Products
Hot News
Send An Inquiry
GET IN TOUCH NOW
×